Windows 10 Booting Slow, How To Solve.

This article will show how to make Windows 10 boot faster by adjusting few settings of your Windows 10 Startup. Generally, after the completion of Windows 10 installation, you will get predefined settings adjusted to the computer configuration. But, these default settings won't actually give better performance and the effect can be directly seen when the computer starts up. So, by tweaking few settings, you can enjoy faster booting of Windows 10 operating system.

First is to set up the system settings.

This actually improves the performance of Windows 10 and no where related to startup. Right click on the Windows Icon and select System from the list. Or you can even select the Properties of My Computer. In the left pane, select "Advanced System Settings" then make sure you are in "Advanced" tab. Now select the settings of Performance then select "Adjust for best performance" or if you aware about the options available, then select "Custom" and then pick the best that you would like to have. To save, choose "Apply" and then "OK" and "OK" again. By doing this, you are now disabled unnecessary animations that slowdown's the computer.

Next is to change few configuration settings.

To proceed further, open Run by pressing "Windows + R" keys together and then type "msconfig". You can even use search box to do the same. Now the console will show you the System Configuration Dialogue box. Here nothing to do with General settings. Move to Boot tab, click on "Advanced Options" then select "Number of Processors" and then make the selection to the maximum available. And tick Maximum Memory and make it to the RAM size. The math is simple. If you have 4GB of RAM then multiply the same with 1024, and the value is 4096. Click on OK to save the changes. Now here select "No GUI boot" which disables Graphical User Interface during startup, change timeout to 4 seconds and make sure to tick "Make all boot settings Permanent" before moving to "Services" tab.

In Services tab, select "Hide all Microsoft services" and check all the available services which are necessary to run after booting up the Windows 10 operating system. Now move to "Startup" Tab then open the Task Manager to disable few startup settings that effects the performance of Windows 10 startup. Now review all the applications which you need to load soon after booting Windows 10 operating system. Make sure not to disable any Microsoft applications that are necessary to run the computer perfectly. To enable or disable, select the application then click on the button.

After all changing the System Configuration settings, Click on "Apply" then confirm the changes by pressing OK and OK again. Now reboot the Computer to apply the changed settings. That's it, and now you have your windows 10 booting faster than before.

How to clean C Drive or Local Disk C in windows 10.

How to clean C Drive or Local Disk C in windows 10. It’s a simple procedure but very effective. We are not using any third party programs to perform this cleaning process, so you don’t have to download another creepy tool to do this. For your information cleaning the unwanted file from C drive will make your windows run much faster.

Step number 1, Cleaning. Go to start button and right click on it. Now choose run from here, type ‘temp’ and click ok, if it's asking for any permission please click on continue. Now you will see files and folders, which are created only for a temporary purpose. So you can select all of them and click on shift + delete on your keyboard. Some file may undeletable so ignore them and delete the rest. Now we have to open the run box again and this time type ‘%temp%’ click on ok and another folder will appear. As same as we deal with the last temp folder, continue deleting all the file. Once you do that, you have to open the run box for the final time, and this time type in ‘prefetch’, now you will see another folder opens, and maybe it asks you for the permission to access the files, in that case, click on continue, and the files and folder will be revealed to you. Now do the same thing you did with the last two folders. Select all and hit shift + Delete.

Step Number 2, Recycle bin. You may know this already but I have to tell you this because a majority of people are unaware of this, Whenever you delete a file by right click delete option, or hitting the delete key on your keyboard, it will not remove the files from your computer, it will keep all the deleted files on your recycle bin until a certain limit and the default Windows 10 recycle bin limit is somewhere around 50 GBs.  Hit the shift + Delete key to delete a file from your computer completely. The recycle bin is using your C Drive space, so technically if you delete something without hitting the shift + delete, it will eventually end up somewhere in your C drive or system drive, which will cause your system go slow. So, if you didn’t clean up your recycle bin frequently, it will acquire a good amount of space out of your C drive. So, delete all of the files from the recycle bin as well. And hope you do this once in a while. At this point, you will see improvements on your c drive space. But wait, it’s not done yet. We can do a few more things, maybe better than what you saw in the previous steps.

Step Number 3, Uninstall. In this step, we gonna show you how to uninstall all the unwanted or rarely using software or programs from your computer, which is basically installed into your c drive by default. By removing those unwanted programs, you can get a lot more space on your C drive. For that, you need to go the start menu and search uninstall, now on the search result you will find the add or remove programs, so click on it. Now it will open the windows settings apps and feature window. Uninstall each and every rarely using or unwanted programs. It’s just a matter of clicking the uninstall button and follow the on-screen instructions.

Step number 4, Optimize. First, you gonna need to go to file explorer, now go to the C drive, right click and choose properties. From here go to the tools tab and click on the Optimize option under the Optimize and defragment drive section. Make sure you have selected your C drive and click on the optimize button once again.

Step Number 5, Disk clean up. This is the last and final step to clean C drive even more or to ensure everything else unwanted are cleaned from C drive. To do this, go to start menu and search Disk clean up. it will performs a quick scan over the drive, check each and every option and click on clean up system files. And it performs a deep scan, once it finished it will open a new window, as same as we deal with the previous window, just select each and every option from here as well, now click ok and delete files. The cleanup process may take a while, so let it Finish! and that’s all we can do to clean up C drive. Hope this article help to experiencing a performance boost, free up space and a more enhanced system responsiveness.

Bluetooth Device Not Working On Windows 10, How To Fix.

How to troubleshoot if your Bluetooth device is not connecting properly to your Windows 10 device, so we're going to go through a few different scenarios on how to hopefully resolve this problem.

First, we're going to actually start by heading over to the Start menu and left click on it, then type ‘services’. Then click on that and wait for a second to load up, and expand it to a better view of what we're doing.

Find the ‘bluetooth support service’ and  right-click on it then click on properties, change the ‘startup type’ to automatic. If service says stopped ,click the start button. Then click on apply and okay to save our change and then you can close services window. Now try  to connect your Bluetooth device, if you're still experiencing problems, then try on the next step.

The next step is heading over to the Start menu again, and left click on it. then type ‘troubleshooting’ and click on that.

On the right side find the bluetooth and run the troubleshooter, be patient and wait for a second until the troubleshooter complete detecting the problems. If there nothing detected then you can close the troubleshooter, now restart your computer to see if your bluetooth is working or not. If your bluetooth still not working, then you can try the next step.

Get back to start menu, and type ‘device manager’ to open the device manager. Find the bluetooth and right click on whatever came up underneath. And then left click on update driver software, now click on ‘search automatically for updated driver software’.

This will begin scanning online for it and then after the scanning is complete you will know whether the driver is up to date or not, you can also find out what driver version you're running. So if you have to manually go online and download additional software or if you wanted to see what version you're running, compared to the latest version to know if you actually are up-to-date or not. Then right click on it again, and click ‘properties’ and then in the new little context menu that appears, click on the driver tab. It will tell you what driver version you're running, this is very important if you have to go online and manually download the driver. And if you manually download the software, then all you have to do is go back to the bluetooth and right-click on it. Then update driver software and then just last click on ‘browse my computer for driver software’, and find the downloaded software and just click on next until it finished.

Hopefully one of the three methods should work for you to fix the Bluetooth Device Not Working On Windows 10.

How to fix 'No Audio Output Device is Installed' problem on Windows 10.

This article will help you to fix your audio or sound problems in your Windows 10 computer, before we start with the solutions make sure to check you haven't accidentally muted your system and also try troubleshooting with your audio device. This may identify your sound problem and it could sometimes fix it on its own. If you have used the inbuilt Microsoft Troubleshooters, before you know they don't always catch everything. here some simple ways to fix 'No Audio Output Device is Installed' problem on Windows 10.

The first method is Uninstall Audio Driver in Device Manager.
Right click on Windows icon and select Device Manager, here you can see sound video and game controllers category. Click and expand it, under this category right-click on the current sound driver. In this case i use realtek high definition audio, right click on it and then select uninstall. A dialog box will now appear to confirm the uninstalling process. 

This window contained an option to delete the driver software for this device. Make sure this box is unchecked, if you check that box it will completely remove the audio driver from your computer. And sound will not work at all, without downloading and installing a new audio driver software. Now press ok and restart your system, after restart, windows will automatically install the driver software in your system. This could fix your problem, installing the proper audio driver can fix this no sound issue. If you have done so, but still can't hear any sound, you can try the second method to fix 'No Audio Output Device is Installed' problem on Windows 10.
The second method is to modify the speakers properties.
Right click on the sound icon at the bottom right corner and click sound. Then select playback devices in playback tab, select your speakers which is set as default and click properties. Go to advanced section and change sample rate and bit depths to 24-bit, 44100 Hertz or 24 bit, 48000 Hertz depending on the speaker configuration or any other from the list until your sound works properly.

Now click apply and ok to save the change, if the issue is still unresolved you can try another method for restoring sound.
The Third Method Is To Disable Audio Enhancements.
The audio enhancements are inbuilt Microsoft and third-party packages designed to make sure your system specific audio hardware works perfectly, sometimes these very enhancements are causing your Windows 10 audio issue. Disabling them might resolve your sound problem, for that right click on the sound icon and select playback devices. In playback tab select your speakers which set as default and click properties. Now click the enhancements tab and make sure to check the box labeled ‘disable all enhancements’, it will be usually shown up. If you don't see an enhancements tab, then this audio device doesn't support configurable enhancements. that's mean, your computer speakers should now be able to play sound normally.

If the sound is still not working then try downloading and installing the latest audio drivers for Windows 10 from the computer manufacturers website. That’s a few simple ways to fix 'No Audio Output Device is Installed' problem on Windows 10 and hope this article useful.

3 Simple Solution to Fix Windows 10 WiFi Problems

Windows 10 users may often face problems with Wi-Fi connections, and this article will discuss about 3 Simple Solution to Fix Windows 10 WiFi Problems. For example your device will show no internet access and you are unable even to connect to the Wi-Fi router, sometimes Wi-Fi will be connected but you will face limited access problem and will not be able to browse internet. Here I will show you three simple methods to solve all these Wi-Fi problems.

First method is to update wireless driver, for that first right click on windows icon from this list select Device Manager. Click on network adapters to expand it, now you can see one thing named as Realtek RTL8723DE 802.11b/g/n PCIe Adapter or something like that depending on what wifi adapter is used on your computer. 

Just right-click on that and uninstall, in the confirm pop-up window sometimes you can see a checkbox to delete this driver don't tick that box. it will completely remove the wireless driver from your computer, then click OK. after that, click on action tab and scan for hardware changes then the wireless driver we have just uninstalled will reappear on the list. If it is not appeared, then scan one more time. Once again right-click, then click update driver software, click on browse my computer for driver software, and click on let me pick from a list from the compatible hardware as shown here. You can choose any one as for example select the first one and click on next, now wait to complete. After finished, you can see that Windows has successfully updated. If this method doesn't work, try another one method.

Second method is Power Saving Method. Right click on Windows icon, and clik on power option. Then choose balanced which is also recommended, sometimes the second one power saver may be chosen. You have to choose the first one, then change plan settings just click on this then click on change advanced power settings. In this window you will find wireless adapter settings, expand it. Then power saving mode, here you have two options on battery and plugged in. what you have to do is change power saving mode to maximum performance on both battery and plugged in.

You will see four different options : maximum performance, low power saving, medium power saving, and maximum power saving. Choose the maximum performance in both places. And save changes. If your Wi-Fi is still not working please try another one method.

The third method is using Comand prompt to fix Windows 10 WiFi problems, right click on windows icon. Click on command prompt with admin in brackets, that means it have all administrative privileges. now copy this comand :

netsh int tcp set heuristics disabled Enter

netsh int tcp set global autotuninglevel=disabled Enter

netsh int tcp set global rss=enabled Enter

netsh int tcp show global Enter

Now you will see many TCP global parameters, some of them are enabled and some are disabled. If one or two of them are enabled and all others are disabled you can proceed close the command window and restart your computer. I hope one of these methods will solve your Wi-Fi problems.

How To Fix Windows 10 Startup Problems

Hello everyone, this article will discuss about how to resolve some startup issues you might be having in Windows 10. There could be a variety of issues that cause startup issues, and this is a few tutorials you can try to restore Windows 10, so we are going to assume that you obviously cannot boot into Windows 10 and that you just keep getting rejected. And you have to keep manually turning your power off, by pressing your power key on your computer until your computer turns off.

So, in Windows 10 after three consecutive power offs that are done improperly. it'll try and launch the automatic repair tool, so just keep that in mind and you does not require any additional CD or DVD downloads, no as no ISO files. Nothing so pretty much, this is built in to Windows and acts as a recovery device for your computer. So you're going to get an error saying your PC do not start correctly press restart to restart your PC, which can sometimes fix the problem in our case. But we can also see here it says you can also press Advanced Options to try other options to repair your PC, so at this point let's go on the Advanced Options button right next to restart, so it should be the right option. Underneath, choose an option left look on troubleshoot. Now there were underneath the troubleshooting window, select Advanced Options. Now there's a few different methods we're going to go through in this tutorial.

The first one will be the selected System Restore, should be the top left item there. So you're gonna get a little dialog window saying that System Restore can help fix problems, that might be making your computer run slowly or stop responding. System Restore does not affect any of your documents, pictures, or other personal data. Recently installed programs and drivers might be uninstalled, this is an important point to note if you do know any programs you might have installed is the reason that are causing this issue. I would highly recommend if you can boot into safe mode and try and install the program or whatever you can do, to remedy whatever you knowingly did if for majority. I'm assuming do not know what caused it, you will select next so we see that we have one system restore point currently created on this computer. If you have multiple you could select any other restore point listed in this drop-down list, so I would recommend trying to back up to the most recently created restore point and then just go backwards from there, but I would try doing the more recent one first and then it's like next this will just confirm that you're going to restore back to this specific time stamp and which computer drive it affects and please keep in mind says if you've changed your windows Password, recently we recommend that you create a password reset disk. So just keep that in the back of your head before you do this and then left click on finish and then you will receive a warning saying “once started, system restore cannot be interrupted. do you want to continue?” please keep in mind you cannot interrupt the system restore once it has begun, so what you want to do is select YES and this will begin to initialize the system restore.

So just be patient, this will take a couple minutes to run. So once it's done we can see the system restore has completed successfully and we can see the date and time in term restored,but in fact it clicked we start buying to restart your computer, so let the computer restart. If for some reason that you are not able to boot into Windows 10 normally, I have another alternative method and every will involve going back into the troubleshooting menu that we were previously in. so we're just gonna go fast-forward back to the troubleshooting menu for you guys who this did not work. So again underneath automatic repair, select Advanced Options and they've choose an option select troubleshoot underneath troubleshoot beside Advanced Options. This time select the bottom-left option that says startup repair fix problems, that keep Windows from loading so left click on that and this will take a little bit of time to run this tool is pretty automatic. So once it's done running, just restart your computer to see if your computer is now able to boot into Windows.

There is one more method we can try and it will involve us going back into the troubleshooting menu, which we're going to go to right now. Assuming that did not work our third and final option today is going to be selecting advanced options, so select that button right there. Select troubleshoot, underneath choose an option select advanced options top right tiles should say command prompt. So you wanna left click on that and the first thing we should do is type our main hard drive here in most cases it should be the C Drive, So you just do a C colon and then hit enter on your keyboard. so once you're underneath the C Drive we're going to type in dir and then hit enter on your keyboard, it should have Program Files to users and windows all in there. Let's how you know you're in the right directory, in some cases it might be the D Drive as well. So just keep that in mind, nice thing we're going to do is type in CD space Ford / windows ford / system 32 Ford / config and then you're going to hit enter on your keyboard so now you're going to type MD space back up. If you've seen other tutorials, it might also say to put it down and back  up. That's because the back up name is pretty common, when you want to back something up so you can name this. Whatever you want doesn't have to be back up, so if you've already made it back home folder in the past you could do backup one. so once you're done setting the name you want the backup to be called hit enter on your keyboard again, at this point you want to type copy Copy then you want to do the star symbol above the e key and do a period or a dime. Whatever you want to call it, then another star sign and then another space and then type back up and then hit enter on your keyboard. Now you want to type cd' reg back and then hit enter on your keyboard so now that we were under the Reg back, so now you want to type dir again and then hit enter so now at this point we're gonna type copy again so copy space star sign D on another star sign space and then two dots so we're going to type copy space star sign dot sign star sign dot  and then hit enter on your keyboard again. So for override you want to overwrite all, so type a on your keyboard so capital a and hit enter on your keyboard so at this point you should be good to go.

You can close out of the command prompt window, so I hope one of these different methods we went through in this tutorial helped you, but try to go back into your safe mode if possible and uninstall any programs you know might be conflicting with the Windows startup if you can get into safe mode so just keep that in mind something very simple like that could be blocking up everything so again I hope this tutorial helped you guys out and I will catch you in the next tutorial.